A PVC pipe fitting, also known as a Plastic pipe connector, is a device used to connect portions of a tube or pipeline. PVC pipe fittings come in a variety of styles that are commonly used in plumbing. Each type serves a distinct purpose and can be employed in specific applications. This article will go over the many types of PVC pipe fittings and what they are used for. Hopefully, this will assist you in selecting the best PVC pipe fittings for your needs.
A pipe fitting is an important aspect of plumbing because it regulates the flow of the medium. You should be able to find a pipe fitting that works for you based on your setup.
A threaded fitting is one sort of PVC pipe fitting. This type features an outer thread that screws into the pipe's corresponding thread. It is frequently used to join two pieces of pipe or to connect a pipe to a valve. A slip fitting is another form of PVC pipe fitting. This style has a smooth bore and fits over the pipe's end without threads. It is typically used to join two pieces of pipe together or to connect a pipe to a coupling or a fitting.
A PVC coupling is a type of PVC pipe fittings that includes two female threads on either end. A tee is a type of PVC pipe fitting that has three apertures. One entrance is for the pipe, while the other two are for branching off the main pipe. It is typically used to form a T-shaped connection. An elbow is a type of PVC pipe fitting that has a curved shape that allows the piping to change direction. It is typically used to join pipes at an angle.
A flange is a form of PVC pipe fittings with bolt holes around the circumference. It is used to connect the piping to another object, such as a wall or a surface. A bushing is a smooth bore PVC fitting that is used to adjust the size of the piping. It is frequently used to connect different sizes of piping. Finally, a valve is a sort of PVC pipe fitting used to control the flow of water through the pipeline. It is frequently used to control water pressure.
Elbows are PVC pipe fittings used in plumbing to shift the flow direction in a pipe. They can be used to make a 90-degree angle connection between two sections of pipe or to redirect the flow of a pipe in another direction. Elbows are available in regular and reducing sizes and can be composed of PVC plastic.
A PVC elbow is commonly used to connect a sink drain to a trap. The elbow allows the drainage pipe to turn 90 degrees and drain into the trap. This keeps sewer gas from entering your house via the drain. Elbows are also used to link supply lines to fixtures like showers and toilets as well as to channel water away from walls or other objects.
There are many different sizes of PVC fittings to pick from. The size of the fitting is determined by the diameter of the pipe to which it is connected. For example, ½ inch fittings - These PVC pipe fittings have a diameter of ½′′ and are used to join ½′′ pipes. ¾ inch fittings - These PVC pipe fittings have a ¾ ′′ diameter and are used to join pipes with a ¾ ′′ diameter. 1 inch fittings - These PVC pipe fittings have a diameter of 1′′ and are used to join 1′′ pipe and so on.
When determining the size of PVC pipes and fittings, it is critical to ensure that the PVC fittings suitable with the pipes to which it is connected. Otherwise, the fitting may not fit correctly and may leak. It is also vital to note that the amount of pressure that may be applied to the fitting is affected by its size. So, if you require a fitting that can resist a great level of pressure, you must choose one that is appropriately sized. Check out Polyfab for a wide range of PVC pipe fittings, and we will assist you in selecting the best one for your needs.