HDPE Pipes and Fittings | HDPE Pipes Fittings Ethiopia, Kenya, Ghana

Butt Fusion Fittings

Butt Fusion is the most traditional type of heat fusion pipe joining for a wide dimension range in the high density polyethylene (HDPE) industry. The fusion areas of the pipes and fittings are heated to fusion temperature and joined by means of mechanical pressure to form a long-lasting and continuous HDPE bond, without using additional materials.

Polyfab is a professional manufacturer of HDPE pipes and fittings made of high quality PE100 raw material, which is warranted for years. The most competitive wholesale prices, stock for regular sizes, and prompt delivery are all available.

Electrofusion Fittings

Our Electro fusion fittings are the decisive solution for Pressure, Gas network, Drainage applications, Including soil and waste disposal. Electrofusion joints the pipe and fittings together using embedded electric heating elements. The material will be melted in between the pipes and fittings area and the joint gap will be filled.

Welded Fabricated Fittings

The most common Heat fusion technique is used for manufacturing HDPE Segmented / Welded fittings. Butt fusion technique is used for manufacturing the Welded HDPE fittings. It uses a heating plate on the angle edged square finished end of the HDPE pipes. After the standard fusion time, the plate has been removed and gives mechanical pressure to create a bonding in between the polymers and then cooled under pressure. Most commonly used welded fittings are Elbow, Tee, Yee, Reducer Tee, Reducer Yee etc…

HDPE Drainage Fittings

Polyfab HDPE drainage systems are the ideal solution for all types of drainage applications such as soil and waste, above and below ground, and chemical waste. Polyfab Manufacture and supply all type of HDPE Drainage Plastic Piping System for above ground, underground and other chemical waste.

Our HDPE division supply all types and sizes of fittings for drainage piping system with 32mm to 315mm sizes range. Higher sizes can provide segmented fittings as per requirement. Polyfab HDPE plastic piping system for soil and waste discharge is designed as per the International Manufacturing Standard of EN 1519.

HDPE Fittings Ethiopia

HDPE Fittings are designed and manufactured at Polyfab Plastic to meet the needs of tropical weather conditions in Ethiopia making them suitable for a wide range of applications. We manufacture all of our HDPE fittings in compliance with ISO 4427, EN 12201, and EN 1519 standards. They are now offered with pressure ranges of PN6 to PN25 in PE100, and diameters ranging from 20mm to 400mm. Buttfusion fittings, Electrofusion fittings, and segmented fittings comes under the range.

HDPE Fittings Ghana

Polyfab HDPE fittings for piping systems are an excellent choice for all applications, including pressure soil and waste, above and below ground, and chemical waste. Polyfab manufactures and supplies various types of HDPE plastic piping systems and we are one of the largest suppliers of HDPE pipes and fittings throughout the region of Ghana. The Welded HDPE fittings are produced using the butt fusion technique. Elbow, Tee, Yee, Reducer Tee, Reducer Yee, and other welded fittings are the most often used ones.

HDPE Fittings Kenya

In order to build the most efficient drainage system for your needs in Kenya and other regions, Polyfab offers HDPE fittings and custom HDPE products. Due to their high level of durability, our HDPE pipes and fittings are the top options among customers in Kenya. HDPE fittings in Kenya are categorized alongside the raw materials used to manufacture polythene pipes and other fittings. They are made of thick plastic that is still very flexible. They are designed in such a way that they are long-lasting and can last for decades. They are used for both light and heavy tasks such as irrigation and transporting gases and liquids. They are used to replace corroded metallic fittings and other low-quality plastic fittings that burst.