How to Cut and Assemble PVC Pipes Easily?

Since PVC pipes are safe for drinking and other residential uses, we largely employ them for our water transportation system. Remember how over time metal pipes could rust? PVC doesn't introduce microorganisms into water that are brought on by biofilms or heavy metal additions. As a consequence, you made the right choice if you decided to install PVC pipes in your home.

Depending on where you would like to use the PVC pipes. PVC pipes are available in a range of diameters. Dimensions start at 20 mm and go up to 830 mm. Many industrial necessitate the heavy-duty PVC pipes which can withstand the significant amount of workload. Similarly, PVC pipes can endure a lot of pressure.

Which cutting tool can be used for PVC pipes?

PVC pipes are tough and rigid. However, there are some machines or tools that can help you with the process of cutting the PVC pipes. The following are some of the most commonly used tools for cutting PVC pipes:

A PVC cutter machine

These machines are specifically designed for cutting PVC, they are the most user-friendly tool. When you squeeze the handle several times, the pipe cutter can easily cut into the pipe. Aside from that, remember to mark the area where you intend to cut before using this tool.

The Miter Saw

The miter saw has multiple uses. That is why you will always find it if you walk into anyone's garage or toolbox. It is possible to cut PVC pipes with a miter saw. The miter is more difficult to use than the PVC cutter, but it does the job. You have the option of using a mini miter or an entire miter. Your straight line will be cut by the complete miter. However, you need to clump your PVC pipe in order to cut it with a mini miter.

A Handsaw

PVC Pipes are also cut with handsaws. If you don't have any other tools and are on a tight budget, you can buy the saw. However, it would be advantageous if you cut the pipe with great force. Before cutting, make sure to clump and mark the pipe from where you want to cut.

Steps to Follow When Cutting A PVC Pipes

Step 1: Assure the Pipe

Placing your PVC pipes on a pipe holder or clumping tool is a good idea. If you don't have either of the two securing tools, you can use duct tape to keep the pipe firmly on the surface.

Step 2: Take measurements and make a mark on right place

Use the measuring tape to determine how much PVC pipe you require - Mark the location where you will cut the pipe with a marking tool or marker pen.

Step 3: Cut the PVC

Cut across the marked line steadily with the miter, handsaw, or PVC cutter. Also, make sure your cut is clean, as a clean pipe will fit easily into other pipes or coupling tools.

Step 4: Deburr the Pipe

Smooth the burrs with your preferred debarring tool. Deburr the inside of the holes as well as the pipe's raw edges.

How can you assemble the PVC pipe easily?

After deburring the PVC pipe's end, make sure the ends of the two sections are properly connected by dry fitting. That is the PVC pipe assembler or the PVC coupling. If they fit, you can dip a dabber in the primer. Apply the primer to the top of the pipe as well as the inside of the other fitting. Replace the primer with cement and repeat the process. Finally, connect the two ends and hold them together for a few seconds. This will ensure that the PVC pipe is properly sealed.

Depending on the pipe and cutting method you use, connecting and cutting the PVC can be the simple. PVC pipes are corrosion resistance free and have the long-life cycle and PVC pipes can be installed quickly. Polyfab provides the best PVC pipes and the cutting tools. For more information comment below.

WhatsApp us